Raspberry Pi Camera Mount - Da Vinci 1.0 / 2.0 3D Printer

Here is a Camera Mount for the Raspberry Pi Camera Module.
It attaches to the Da Vinci Frame using a M3 Nut & Bolt.

Requires:
~ 1 x M3 - 16mm (Minimum)
~ 1 x M3 - 8mm (Size is not important here, just a small M3 Screw)
~ 2 x M3 Nuts

Camera Module: https://www.adafruit.com/products/1367
24" Flex Cable: https://www.adafruit.com/products/1731

If you like what I've done, please consider sending a donation:
https://www.paypal.me/cherven