Oogoo Bonding Mesh with Laird Popkin's OpenSCAD Custom Mesh Generator

This is a test plate to test a 3d printed Oogoo bonding mesh. Oogoo cannot be glued to most plastics, so it is necessary to create a mechanical bond.

The oogoo is applied into the mesh just after mixing with a spreader. After it cures, it is locked in place by the mesh. Bonding strength appears to be between 25psi to 50psi, but 100psi should be possible by adjusting mesh characteristics and oogoo mixture.

The openSCAD custom mesh generator was created by Laird Popkin. The number of layers