Thingiverse
577 snider snap cap
door death4u
19
Downloads
10
Likes
0
Makes
This is a snap cap for .577 Snider. It is for function testing and loading and unloading practice with the Snider rifle.
Once printed sand smooth any bumps or extra plastic. Then try it in the rifle. If it dosen't slide in easily don't force it, just keep sanding until it slides in and extracts easily. I used finger nail sanding boards to sand and polish the cartridge.
https://www.amazon.com/Professional-Buffers-Manicure-Pedicure-Colorful/dp/B07HD4ZGBN/ref=sr_1_15?keywords=fingernail+sanding&qid=1557022005&s=gateway&sr=8-15
The hole in the bottom can be filled with silicone to provide a cushion for the firing pin.
https://www.youtube.com/watch?v=7fwytA5r2Mw
Once printed sand smooth any bumps or extra plastic. Then try it in the rifle. If it dosen't slide in easily don't force it, just keep sanding until it slides in and extracts easily. I used finger nail sanding boards to sand and polish the cartridge.
https://www.amazon.com/Professional-Buffers-Manicure-Pedicure-Colorful/dp/B07HD4ZGBN/ref=sr_1_15?keywords=fingernail+sanding&qid=1557022005&s=gateway&sr=8-15
The hole in the bottom can be filled with silicone to provide a cushion for the firing pin.
https://www.youtube.com/watch?v=7fwytA5r2Mw
death4u publiceert ook op
123 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!