Thingiverse
Filament Roll Stand
by Uija
16
Downloads
10
Likes
0
Makes
As my UP Plus 2 comes with thinner Rolls, I had to build something new. I decided to build a holder, that stands external and is build with something I have in my hobby room.
Needs 12mm rod (I use 100mm) and 10x10mm strips.
You need for each side:
2* 10x10x160mm
1* 10x10x120mm
My Strips are 9.8mm thick, so you may have to change the scad file for other sizes.
Update February 2015 - I added a "roll" with a greater diameter so the filament rolls are rotated more easily.
Needs 12mm rod (I use 100mm) and 10x10mm strips.
You need for each side:
2* 10x10x160mm
1* 10x10x120mm
My Strips are 9.8mm thick, so you may have to change the scad file for other sizes.
Update February 2015 - I added a "roll" with a greater diameter so the filament rolls are rotated more easily.
Sign in to leave a comment
Sign in