Thingiverse
QAV250 - Antenna holder
by scoopdreams
62
Downloads
35
Likes
0
Makes
An antenna holder designed to route at 45 degrees antenna wires coming out from those strap slots on top plate.
Holes for silicon tubes are 3.5mm so can take 3mm tubes or 4mm tubes for a tight fit.
Weighs about 7.1gm printed.
Holes for silicon tubes are 3.5mm so can take 3mm tubes or 4mm tubes for a tight fit.
Weighs about 7.1gm printed.
Sign in to leave a comment
Sign in