X-Axis Endstop Bracket

This bracket was made to fit the MendelMax 1.5 X-axis using the Pillow Blocks from Lulzbot (https://www.lulzbot.com/ACME-Pillow-Block-X-End-Set-2.0). The clamps fit tight on to the 8mm X-Axis rods to eliminate possible movement of the endstop.

The endstop mount is derived from the X-axis mount from here http://www.thingiverse.com/thing:181468. I modified the height to lower the endstop to be closer to the rods and moved the clamps to fit the spacing requirement.