Thingiverse
5x5x5 Led Cube Base
von Dark_Phobos
0
Downloads
2
Likes
0
Makes
Remix of "4x4x4 PL9823 LED Cube Base by ChiefPoints" made to fit a 5x5x5 LED cube.
Will fit an LED cube on a perf board that is 120mm wide and 110mm in depth in the lid opening.
I also moved the ports for barrel connector power input, power switch and Arduino USB access to the back, while keeping a hole up front for a potentiometer to control brightness.
My 5x5x5 LED cube runs on an Arduino Nano, uses PL9823 addressable RGB LEDs.
It is based one the guide from Great Scott! on YouTube:
https://www.instructables.com/Make-your-own-SIMPLE-5x5x5-RGB-LED-Cube/
I used the example Arduino sketches from Doug Domke:
https://www.hackster.io/doug-domke/another-5x5x5-rgb-led-cube-82fdd8
Will fit an LED cube on a perf board that is 120mm wide and 110mm in depth in the lid opening.
I also moved the ports for barrel connector power input, power switch and Arduino USB access to the back, while keeping a hole up front for a potentiometer to control brightness.
My 5x5x5 LED cube runs on an Arduino Nano, uses PL9823 addressable RGB LEDs.
It is based one the guide from Great Scott! on YouTube:
https://www.instructables.com/Make-your-own-SIMPLE-5x5x5-RGB-LED-Cube/
I used the example Arduino sketches from Doug Domke:
https://www.hackster.io/doug-domke/another-5x5x5-rgb-led-cube-82fdd8
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!