Thingiverse
5x5x7
von kequals
84
Downloads
65
Likes
0
Makes
WARNING: This puzzle turns terribly. I would not recommend printing it. This really should be printed in SLS to turn well. It is fully functional, but it catches so much that it hardly works.
A 5x5x7 twisty puzzle. It is fully functional and proportional. It can also shapeshift.
To make, print each part by the number indicated on the filename.
You also need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 64mm 5x5.
A 5x5x7 twisty puzzle. It is fully functional and proportional. It can also shapeshift.
To make, print each part by the number indicated on the filename.
You also need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 64mm 5x5.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!