Thingiverse

6" Draining Flower Pot

by dtm2477

47 Downloads

43 Likes

0 Makes

My wife asked for a custom pot that would drain. Print settings: .8mm nozzle, 2 shells, 50% infill, support required under middle section (not much)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for 6" Draining Flower Pot?

Any FDM printer should handle 6" Draining Flower Pot just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does 6" Draining Flower Pot need supports when printing?

Yes, 6" Draining Flower Pot will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is 6" Draining Flower Pot available in?

6" Draining Flower Pot is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is 6" Draining Flower Pot free to download?

Yes, 6" Draining Flower Pot is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

6" Draining Flower Pot

Add to Collection