6 Point Lamp

I made two versions of the lamp base. one with bolts and one without the bolts. The cable I used was very strong and pushed the lamp from the wall where I placed it. So I used some big washers and the bolts to add some weight to it. It might be not neccessary in every case. so you decide with version you want to use. If you want to use the bolt-version you need to print two of the screws. the inner diamater of the bolt is 13mm. I used 12 washers with the dimensions of 37x13mm.For the lamp I used an cable set from the hardware store for E14 lamps. mine is an LED with 7 Watt which is very bright. An E27 kit should also fit, alsoI didn't test it. I used PLA for the whole lamp. printed with 0.2 layer height and used a 0.4 Nozzle.