ESP8266 ESP-03 Socket

RM 2.54 / Breadboard Socket for ESP8266 ESP-03 or ESP-04.
Provided as is.
May need 0.25 nozzle or smaller.
Printed with 0.2mm layer height, 0.25mm extrusion width.
Holes don't go through! Holes that small won't print fine on my printbed, so the first layer is compact. Use 1mm drill or just a hot cable to drill through.

Instructions:
- Print ;)
- Drill/clean holes
- fix socket to breadboard with ~2cm long ~0.6mm thick wires
- bend wires 90° to the center
- fix wires with glue