Free Tools & Spare Parts STL Download - Stackable drawers from Thingyverseby Mattwood198

Drawers are entirely 1mm thickness now for printing with a 0,4mm nozzle set to 0,5mm line width. The base of the drawer is 0.84mm thick for 3 layers at 0.28 (check your slicer doesn't print the first layer thinner as Cura does by default)-Changed the handle to a custom one. Still prints without supports.-Rounded the base's corners-Made the Base's bottom thinner (and extended the locating pin holes to compensate)-Added an optional fence around the top plate to store more stuff on top without loosing it down the back.The drawers are 20mm deep (25mm-ish base) and 40mm deep (50mm-ish base)0.4mm nozzle - Print at 0.28 later height with 0.5mm line width0.8mm nozzle - Print at 0.4mm later height with 1.0mm line widthBase is about 70 grams eachDrawer is about 90 grams each