Thingiverse
Dual Jhead Bowden Cooling mount
by chanyote66
9
Downloads
15
Likes
0
Makes
Work in Progress
This is another Extruder cooler for a extremely compact dual extruder with cooling and part cooling. Still needs some work to angle the Part coolers inwards and mount holes.
This is designed to use PTFE tube through the carriers to provide an extremely straight line into the extruder. This one is for 4mm tube used with 1.7mm filament.
55mm wide
15mm from lower rail to head (z)
Fan sits over top rail for optimal clearance in all directions
This will work best with
This is another Extruder cooler for a extremely compact dual extruder with cooling and part cooling. Still needs some work to angle the Part coolers inwards and mount holes.
This is designed to use PTFE tube through the carriers to provide an extremely straight line into the extruder. This one is for 4mm tube used with 1.7mm filament.
55mm wide
15mm from lower rail to head (z)
Fan sits over top rail for optimal clearance in all directions
This will work best with
Sign in to leave a comment
Sign in