Rigidbot Build Plate Glass Clamp

A part to clamp a 3mm glass plate to the Rigidbot Build Plate.
I used 16mm M3 Hex nuts with washers to ensure the bolts do not wear through the clamps.

Printed using ABS and 50%or more infill. Use a 100% infill a stronger and longer lasting clamp.

I have included the OpenSCAD file so you can build clamps for various glass thicknesses, but I have not tested it thoroughly.

Remember to get longer nuts if you are using thicker glass.

Currently, this is for the RB big, i am