Thingiverse
5/8" Square Tubing End Cap
by mklange
35
Downloads
22
Likes
0
Makes
I'm building a shelf with 5/8" square tubing; I have 3/4" and 1" end caps, but no 5/8" caps. Designed this based upon the larger caps.
End cap for 5/8" square tubing. I tested this with 16 gauge walls, not sure if it will work with 18 gauge, should work with 14 gauge. You will need to rotate the object from the STL file to place the cap top on the build plate.
This was scaled for ABS plastic, it may print out a bit oversize if you are printing with PLA. Rev - may work better
End cap for 5/8" square tubing. I tested this with 16 gauge walls, not sure if it will work with 18 gauge, should work with 14 gauge. You will need to rotate the object from the STL file to place the cap top on the build plate.
This was scaled for ABS plastic, it may print out a bit oversize if you are printing with PLA. Rev - may work better
Sign in to leave a comment
Sign in