Sculptures & Artworks STL Download - Dice trophyby R4T

The trophy is made up if 6 parts1 base piece (E)2 outer pieces (C and D)2 center pieces (A and B)1 tip piece (F)These parts can be printed with the flat side down (the outer pieces will touch the build plate by the two flat pieces.Material: PLALayer height: .12-.2mmSupports: YesBRIM?: optRetraction:4mmInfill: 10-20%Temp:200Slicer: any main one (I use Cura)To assemble the trophy once printing has finished, remove the brim of each of the pieces. Glue together the two center pieces (A and B) to create the center pole (AB)Take one of the outer pieces( C ) and slide it on to the center pole (AB). Take the other outer piece (D) and slide it into the other side of the pole. Glue these two pieces together to encapsulate the center shape. (T)Place your constructed shape ( T) onto the base (E) with the longest pole downwards. Glue the outer pieces to the base, but be careful not to glue the center piece as well.Once that has dried, glue the top piece (F) onto the top of the pole (AB)Your trophy is now completed! I would have uploaded this in PDF format but it won’t let me for some reason :(