3D Printed R/C T-7A Red Hawk 6S 70mm EDF

= Maiden flight Videohttps://youtu.be/-ysglPaew9Ehttps://youtu.be/zDstPOT8Tq0= EDF / Control Surface testhttps://youtube.com/shorts/L36sa00iNds= Introduction- The T-7A Red Hawk is a next-generation advanced trainer for the US air Force jointly developed by Boeing and SAAB.- In the T-X program, which replaces the T-38, it was selected through competition with the T-50A of Lockheed Martin and KAI.= This Model- This model scaled down the T-7A as precisely as possible, and the detailed shape was also designed to be similar to the real one.- This model is approximately 1:16.5 in scale. Some shapes have been changed for R/C purpose flight.- It uses Single 6S 70mm EDF unit and the flight AUW is about 1.7kg.- Due to its fairly high Thrust-to-Weight ratio, it has room for a variety of maneuvers and is capable of fast flight- After painting according to the color scheme, you can print and apply the provided decal.= SPECIFICATIONWINGSPAN : 790MMLENGTH : 1,152MMALL UP WEIGHT : AROUND 1.7KG(READY TO FLY, ACCORDING TO YOUR SETTING, WITH 6S 4,000MAH)POWER SYSTEM : SINGLE 6S 70mm EDF