Other STL Download - Customizable Floating Fish Feederby Ganea V

Design ConceptA fish feeder that floats or can be submerged and spreads the food fixed in the area of ​​the needle.It can be used together with a hanging ring when you don't want it to float, or together with one of the 2 floats, short or long.For a customization according to your needs, I have designed 2 body variants, of different capacities. There are also 2 versions of CAP available, the normal one with a lower buoyancy, and the FAT one with an improved buoyancy, for cases where the food is heavier and does not float. For cases where the food has a high buoyancy, you can insert a weight in the body, and test in a bowl of water or near the shore.The fishing line can be passed through the whole assembly, and its position in relation to the needle can be set from the stops.Each piece connects with a safe and efficient "Click and Go" system, eliminating thread wear.Print SettingsPrinter: K1C 0.4 nozzleSlicer: Creality Print 5.1Material: PLA works okLayer Height: 0.2Infill: for CAP (both versions) 10% and for the rest 100%Wall loop: 4 for CAP (both versions)Print positions:Supports: YES For BODY manual support painting (normal snug) and for the rest Normal(auto) snug AssemblyEach body can be connected with any CAP through a "Click and Go" system, you only need to align the 2 parts, insert the CAP to the base of the BODY and rotate until a "CLICK" is heard.The same connection method is for CAP with FLOAT or RING. If you have not properly deburred the support on the parts, it is possible to prevent the connection. FLOAT is provided with a straight edge, in case you cannot turn the part by hand, you can use a wrench or pliers.HAPPY FISHING!!!