Articulated Kohaku River Spirit Dragon Toy v2

Fully Expandable, Customisable, and Detailed.Make Kohaku as short or long as you want, as large or small as your printer can handle, by adding or removing neck, body, and tail segments.Choose from two head styles; do you want to print it with whiskers, or make your own using filament strips? The choice is yours!Two styles of hands and feet; want him to stand upright? There are flat feet for that. Want him to look like he's flying? There are curled feet to do the job!An optional upper mouth insert and neck mane are included, for extra detail!Each part is easily interchangeable thanks to the use of ball-and-socket joints.His mouth opens and closes, and has inner-mouth details already sculpted into the lower jaw!All details show up even on 0.20mm layer height, though to have him look at his best, I recommend using 0.16mm.DIY or use the preset Bambu Studio files.Raw STL files have been provided for you to use in your slicing software of choice, all scaled appropriately for you to import and print in flat colours.A 3MF made for use in Creality Print is also provided with support data painted onto it, but no colour data is available in this file.A Bambu Studio 3MF has also been provided with the model fully painted and Gcode adjusted for full-colour printing optimization on the BambuLab X1C. This file has colour data and support paint already provided for you.Important InformationIf you are using the raw STL files: additional steps are required before printing can start. Please read the instructions carefully and make relevant adjustments for your printer. The Bambu Studio and Creality Print files have been made with all supports/settings pre-assigned, so all you have to do is prepare your printer and AMS, and print.All socket jointsMUSTbe printed facingsidewaysor no more than at a45-degree angle, otherwise they will break when you insert the ball into them. Please see the below picture for the ideal placement.Supports areREQUIRED.All parts can safely use auto-generated s