Thingiverse
67 Fidget Toy
von Psyonic
0
Downloads
0
Likes
0
Makes
How do I feel about this one?? Eh... A bit 6-7 I 'spose 😆
It moves up and down doing the hands thing when you rotate the wheel underneath.
The hands just press onto the moving parts, they can be glued but leaving them just pressed on give an failure point if it gets dropped, then they can be simply just pushed back on and the tears stop! 😉
Assembly is pretty easy, the only tricky part is getting the front side connecting rod to locate into the peg on the wheel, but it's not difficult.
The numbers need to b e glued onto the hands, there are holes to put a piece of 1.75mm filament into to help align the 2 parts while gluing. I recommend using something like JB Weld for gluing as there isn't much surface area between the 2 parts.
It moves up and down doing the hands thing when you rotate the wheel underneath.
The hands just press onto the moving parts, they can be glued but leaving them just pressed on give an failure point if it gets dropped, then they can be simply just pushed back on and the tears stop! 😉
Assembly is pretty easy, the only tricky part is getting the front side connecting rod to locate into the peg on the wheel, but it's not difficult.
The numbers need to b e glued onto the hands, there are holes to put a piece of 1.75mm filament into to help align the 2 parts while gluing. I recommend using something like JB Weld for gluing as there isn't much surface area between the 2 parts.
Psyonic veröffentlicht auch auf
2 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
