3D Printer Accessories STL Download - Ender 3 V3 SE/KE Brush Holderby Dane Reasenberg

This is a fully automatic 3d printed brush holder that can clean your nozzle before every print using custom gcode. I remixed this model from this model: "https://www.printables.com/model/742343-ender-3-v3-ke-and-se-automatic-nozzle-cleaning-bru". Ive changed the original model from my model by adding one extra arm to grab on to the plate. I did this because the original model was wobbly therefore having less nozzle cleaning abilities. Also, to attach the Bambu Labs brush I had in the pictures, I used this model: "https://www.printables.com/model/969575-blobifier-dropin-adapter-for-bambu-silicone-nozzle".Here is the custom gcode I used for the automatic cleaning before every print. You might need to tweak these codes, every printer is different.M220 S100 ;Reset FeedrateM221 S100 ;Reset FlowrateM140 S[bed_temperature_initial_layer_single] ;Set final bed tempG28 ;HomeG92 E0 ;Reset ExtruderG1 Z2.0 F3000 ;Move Z Axis upM104 S[nozzle_temperature_initial_layer] ;Set final nozzle tempG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start positionG1 X103 Y-18 Z5 F5000.0 ;Line up with brushM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilizeM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilizeM300 S1000 P200 ;First beepM300 S0 P200 ;WaitM300 S1200 P200 ;Second beepG1 X150 Y-18 Z5 F5000.0 ;Wipe 1; ->G1 X105 Y-18 Z5 F5000.0 ;Wipe 2; <-G1 X150 Y-18 Z5 F5000.0 ;Wipe 3; ->G1 X105 Y-18 Z5 F5000.0 ;Wipe 4; <-G1 X150 Y-18 Z5 F5000 ;Wipe 5; ->G1 X105 Y-18 Z5 F5000.0 ;Wipe 6; <-G1 X150 Y-18 Z5 F5000.0 ;Wipe 7; ->G1 X105 Y-18 Z5 F5000.0 ;Wipe 8; <-G1 X150 Y-18 Z5 F7500.0 ;Wipe 9; ->G1 X105 Y-18 Z5 F7500.0 ;Wipe 10; <-G1 X150 Y-18 Z5 F7500.0 ;Wipe 11; ->G1 X105 Y-18 Z5 F7500.0 ;Wipe 12; <-G1 X150 Y-18 Z5 F7500 ;Wipe 13; ->G1 X105 Y-18 Z5 F7500.0 ;Wipe 14; <-G1 X150 Y-18 Z5 F7500.0 ;Wipe 15; ->G1 X105 Y-18 Z5 F7500.0 ;Wipe 16; <-G1 X105 Y-18 Z8 F5000.0 ;Raise to clear brushM190 S[bed_temperature_initial_laye