Thingiverse
RaspberryPi 2 and B+ Case with magnets
by qubit01
104
Downloads
79
Likes
1
Makes
My new version of the RaspberryPi Case with magnets. This is an improved design from my A+ case http://www.thingiverse.com/thing:580757
The RPi is held in with 2.5mm screws in the bottom shell. The screws are directly bolted into the plastic. I usually make sure that the holes fit the thread by drilling it with a 2.2 mm drill.
The top attaches to the bottom by 4 magnets. With that I am able to achieve that there is not a single screw, fastener, etc. on the outside of the case.
The magnets
The RPi is held in with 2.5mm screws in the bottom shell. The screws are directly bolted into the plastic. I usually make sure that the holes fit the thread by drilling it with a 2.2 mm drill.
The top attaches to the bottom by 4 magnets. With that I am able to achieve that there is not a single screw, fastener, etc. on the outside of the case.
The magnets
Sign in to leave a comment
Sign in