Thingiverse
6X35mm Finder Scope
por charlesodonnell
7
Descargas
8
Likes
0
Makes
This is a 6X35mm finder scope based on the following items from surplusshed.com:
https://www.surplusshed.com/pages/item/L2075.html
https://www.surplusshed.com/pages/item/L14523.html
It consists of the following parts:
Optical Tube (qty 1) - holds the 35mm objective lens
Dew shield (qty 1) - screws onto the OT to hold the objective in place
Eyepiece holder (qty 1) - screws into the other end of the OT; holds the eyepiece assembly
Eyepiece barrel, internal thread (qty 1) - holds the Plössl lenses and the crosshairs
Eyepiece lens spacers (qty 2) - the lenses in the eyepiece set are nominally 14mm diameter but some were slightly larger. I include both 14mm and 14.6mm diameter spacers
Eyepiece barrel, internal thread (qty 1) - this threads into the barrel to hold the lenses in place
Eyepiece crosshair holder (qty 1) - glue thin wire or monofilament into the grooves to add crosshairs. Thread into the barrel last.
Eye guard (qty 1) - print this in TPU
Finder holder (qty 1)
https://www.surplusshed.com/pages/item/L2075.html
https://www.surplusshed.com/pages/item/L14523.html
It consists of the following parts:
Optical Tube (qty 1) - holds the 35mm objective lens
Dew shield (qty 1) - screws onto the OT to hold the objective in place
Eyepiece holder (qty 1) - screws into the other end of the OT; holds the eyepiece assembly
Eyepiece barrel, internal thread (qty 1) - holds the Plössl lenses and the crosshairs
Eyepiece lens spacers (qty 2) - the lenses in the eyepiece set are nominally 14mm diameter but some were slightly larger. I include both 14mm and 14.6mm diameter spacers
Eyepiece barrel, internal thread (qty 1) - this threads into the barrel to hold the lenses in place
Eyepiece crosshair holder (qty 1) - glue thin wire or monofilament into the grooves to add crosshairs. Thread into the barrel last.
Eye guard (qty 1) - print this in TPU
Finder holder (qty 1)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!