Thingiverse
7 Inch Screen Base
2
Downloads
7
Likes
0
Makes
I made a base for my 7-inch screen that I bought on Amazon. You will need:
- The Base and the Frame (3D printed)
- Four 1/8-inch (3 mm) screws to hold the screen in place
I designed it so that you can easily snap the frame onto the base and remove it whenever needed.
Neither STL file requires supports.
I do not recommend printing it with less than 10% infill.
*The photos are from the previous version, where the power switch was inaccessible due to the frame. I modified the frame, and this issue has now been fixed.
- The Base and the Frame (3D printed)
- Four 1/8-inch (3 mm) screws to hold the screen in place
I designed it so that you can easily snap the frame onto the base and remove it whenever needed.
Neither STL file requires supports.
I do not recommend printing it with less than 10% infill.
*The photos are from the previous version, where the power switch was inaccessible due to the frame. I modified the frame, and this issue has now been fixed.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
