Thingiverse
7 Segment Display (6,9 Inch)
von Lukas_
2
Downloads
2
Likes
0
Makes
The display is 6,9 inch big (150x90 mm) and it's designed to hang it on the wall.
If you print four big and one small piece as I did you can use it as an watch.
If you want to put two displays together you have to glue them together.
For one of the big ones you need:
21 x 5mm LED's
and for the small one:
2 x 5mm LED's
Normally you don't need to drill the holes with a drill again.
The LED's should fit snug right into the holes.
If you print four big and one small piece as I did you can use it as an watch.
If you want to put two displays together you have to glue them together.
For one of the big ones you need:
21 x 5mm LED's
and for the small one:
2 x 5mm LED's
Normally you don't need to drill the holes with a drill again.
The LED's should fit snug right into the holes.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
