7" Touchscreen Case for Raspbery Pi

Here is my case design for the 7" touchscreen for Rapsbery Pi by DFRobot.

You can find the touchscreen here : https://bit.ly/2Ven1TB

The case itself is just the part name "back", you can mount it on the stand I design or you can use a vesa mount. The case as 4 holes that corresponds to a vesa 75 mount.
You can add a Raspberry Pi camera module v2 on the top using the support and cover.

I've also included a 40mm fan opening to cool the raspberry pi from the back.


With the 3D printed parts you also need :
DFRobot 7" touchscreen
A Raspberry Pi (from B+ to 3B+) or an Asus TinkerBoard
A 40mm 5v fan

1 M5x25mm bolt with 2 washers and a wing nut (for the up/down pivot of the stand)

2 M4x10mm bolts
2 M4x35mm bolts (for the vesa mount)
4 M4 nuts

1 M4x8mm
1 M4 nut (for the pivot)