Platypus Clicker & Keychain (Separated Parts)

💰You can access the commercial license anytime by joining my [Patreon](https://www.patreon.com/posts/welcome-to-our-101828009) at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same tier before May 31, 2025—so don’t miss out! 🎉

🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit isn’t quite right, please adjust the size as needed.

🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.

🔔This model requires keyboard switches to function properly.

🔔Support is required for this model to ensure proper printing. Specifically, support for the bottom of the eggshell plate is a must.

🔔Printing in 0.15mm layer height is recommended.

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add b