Filawinder servo filament guide leverage multiplier

This will increase the leverage of the servo, and keep it from growling, but, at the expense of range movement. As I don't see why it needs to move 180deg. anyways.

The pivot is an 8x32x1.25in machine screw and 3 nuts.
the screw gets bolted onto the base, and the bottom spacer drops on that, then the guide with the top spacer, and jam nutted at top.
and the servo gets hot-glued.
You can set it up for whatever spools that you use.

I printed the base with a .8mm nozzle, so, the base wi