70cm Yagi

70cm Yagi made on a 20mm aluminium boom with 6mm aluminium elements. You will need to use an online Yagi program to come up with the boom and element lengths. The driven element is mounted in the driven box with the coax choke. An "N connector" socket is mounted on the back end of the driven element box. For the reflector and every driven element you will ned to print an element support. You will also need to tap a threads in the element supports to hold the elements in place and also hold the element support to the boom. You will need to print off two driven element box clamps and also tap threads in these for mounting.