Screw Adjustable Z Endstop Bracket for Prusa Mega

This is a simple 2 piece bracket to adjust Z Axis height for the endstop.

- No support material
- 25% infill
- Slower speed to acheive a nice vertical rod on P2

Needed Parts:
2 - M3 x 20mm Screws
1 - M3 x 40mm+ Screw (I prefer Allen Socket, but you could use any)
3 - M3 nuts
1 - Pusher Spring (I used a 5 mm pusher, but you could use a spring from a pen as well)

You'll to attach the endstop pin to P2 in the desired orientation and the bracket to the desired location on the pr