Thingiverse
Printrbot Simple Maker 1405 Z Axis Stabilizer
15
Downloads
16
Likes
0
Makes
Version 1: Smooth rod and acme screw stabilizer for 1405 Simple. Improves z axis wobble that translates to x & y waviness as you go up in Z.
For best results, drill out the rod holes to 5/16" or 8mm and drill out the acme screw hole to 1/4". Apply a little bit of grease to keep it quiet.
In the comparison picture, top left is before brace and bottom right is with brace.
You may want to check your max Z height as the Y carriage can hit it if you go up too far.
For best results, drill out the rod holes to 5/16" or 8mm and drill out the acme screw hole to 1/4". Apply a little bit of grease to keep it quiet.
In the comparison picture, top left is before brace and bottom right is with brace.
You may want to check your max Z height as the Y carriage can hit it if you go up too far.
Sign in to leave a comment
Sign in