Thingiverse
Bike Pump Holder
by macropin
18
Downloads
11
Likes
0
Makes
This is a mount for your bike pump or any other tubular object. Screws onto the bottle cage mounts (2.5" spacing).
The OpenSCAD model is partly parametric, meaning you can adjust it to fit your pump.
The provided STL is for a pump 22mm diameter, and bike frame 45mm diameter.
If printing PLA, then 3 shells and 20% fill will work. If you use more shells or a higher fill rate then it will be stiffer and the hold will be much tighter. My first print was 40% fill and 6 shells and it w
The OpenSCAD model is partly parametric, meaning you can adjust it to fit your pump.
The provided STL is for a pump 22mm diameter, and bike frame 45mm diameter.
If printing PLA, then 3 shells and 20% fill will work. If you use more shells or a higher fill rate then it will be stiffer and the hold will be much tighter. My first print was 40% fill and 6 shells and it w
Sign in to leave a comment
Sign in