Mendel rotated geared extruder

Based on the trinity extruder, but rotated 90 so the phidgets stepper does not foul on the X ends

Phidgets 5.18:1 geared stepper x 1
M4 x 50 caphead bolt x 2
M4 washers x 4
M4 nuts x 2
M3 x 8 caphead bolt x 4
C510 (1/4 x 1/2 x .035) springs x 2 from century springs or similar
8mm trinity labs hob x 1
M3 nut x 1
M3 x 25 caphead bolt x 1
608 bearing x 1
8mm x 20mm shaft (or M8 x 20 grub screw, or M8 x 20 threaded rod)