Thingiverse
2015 wrx shifter stop
by samako
46
Downloads
34
Likes
1
Makes
Helps reduce the slop of the shifter in the 1st and 2nd gear channel.
Should be printed with ABS or TPU ( at least 60D hardness), at 100% infill for strength.
You'll need 2 M6x16mm bolts or cap screws and maybe a couple locking washers to hold it in place. The original bolts are too short to hold both pieces.
Should be printed with ABS or TPU ( at least 60D hardness), at 100% infill for strength.
You'll need 2 M6x16mm bolts or cap screws and maybe a couple locking washers to hold it in place. The original bolts are too short to hold both pieces.
Sign in to leave a comment
Sign in