Azteeg X5 (v1.1 with screw terminals) under-bed mount for Mini Kossel

The original mount was designed for the X5 v1.0, with pin terminals.

The v1.1 is several mm longer at the front, so it won't fit the original mounting holes.

Also, the screw terminals require the wires to enter from the sides, instead of the top. That meant you had to remove the board form the box to connect or remove circuits.

I moved the mount columns back several mm, and changed the wiring "troughs" on the top edge to slots in the side, to give access to the holes in the screw termi