Thingiverse
P60 drop-in mount for quadcopter.
by Sneezy3D
1
Downloads
2
Likes
0
Makes
A basic holder for P60 drop-in modules.
This works but could be improved. I found after making it that not all drop-ins are quite the same diameter. I measured one and fitted it to another, and had to do some work with a Dremel to make it slide in.
I used some clear polycarb sheet to make the front window to protect the LED and reflector.
Also required is a mod to you P60 to restrict it's power to reduce heat, or make a DIY heat sink that presses into the back of the brass pill.
The dri
This works but could be improved. I found after making it that not all drop-ins are quite the same diameter. I measured one and fitted it to another, and had to do some work with a Dremel to make it slide in.
I used some clear polycarb sheet to make the front window to protect the LED and reflector.
Also required is a mod to you P60 to restrict it's power to reduce heat, or make a DIY heat sink that presses into the back of the brass pill.
The dri
Sign in to leave a comment
Sign in