Thingiverse
70 to 50 mm Adapter for use with clip-on 50mm Fan Duct for XYZprinting Davinci 1.0
by Wangler
38
Downloads
25
Likes
0
Makes
This is a 70-50mm adapter, for use on my Da Vinci 1.0 in conjunction with http://www.thingiverse.com/thing:447903
Whelp, found it will interfere with full Y translation...use at your own risk!
Changed the parametrics to keep the height to a minimum, and uploaded a new file (has 50_to_70 in name). This works well, but you need to trim the fan duct part a bit to get this part sitting flush.
Using an old 70mm AMD CPU cooler fan that is less than 17.5mm thick allows for the fan to just cle
Whelp, found it will interfere with full Y translation...use at your own risk!
Changed the parametrics to keep the height to a minimum, and uploaded a new file (has 50_to_70 in name). This works well, but you need to trim the fan duct part a bit to get this part sitting flush.
Using an old 70mm AMD CPU cooler fan that is less than 17.5mm thick allows for the fan to just cle
Sign in to leave a comment
Sign in