Brushless Gimbal for GoPro

To build this gimbal you'll also need a bearing (11mm outside), some 3m screw and nut.
You'll also need to build an axis which will go inside the bearing. To build the axis, I used a long 3m screw and a carbon tube to avoid any backlash.

I used the following motors :
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=43040
The inside part **interieur.stl** is 1mm bigger than gopro size, I use this product to avoid camera slippering :
https://www.hobbyking.com/hobbykin