Slicer Discord
8up Shotgun Shell Caddy – 3D-Druckmodell von MakerWorld MakerWorld
Sport & Outdoors

8up Shotgun Shell Caddy

15 Downloads
17 Likes
2 Makes
Zum Modell
UPDATE 4/18/2017I have gone through a couple revisions of this. The current version is rev3, which is making much better use of space and leaving a much smaller footprint. I also uploaded the .iges files so if anyone would like to modify them they can.This is my try at a shotgun shell caddy, as used by many multi-gun competitors. This is not to be used for commercial purposes.You will need:8 - M4x20mm Machine Screws8 - M4 Nuts4 - 1/2"x 1/16" magnets (http://www.kjmagnetics.com/proddetail.asp?prod=D81-N52)1 pack of rubber bumpers (http://www.mcmaster.com/#9310k12/=13rn8to)1 TekLok mount (if that is what you want to use)Super Glue3D Printed Parts:Material: ABSOne of each: 8_up_body, 8_up_front, 8_up_backLayer Height: 0.2mmInfill: 30%Shell thickness: 1.0mmBottom/Top thickness: 1.0mmInstructions:Print the parts.Press the M4 nuts into the slots, you may need to use a hammer and a punch to tap them in to place.Glue the magnets into the 8_up_front part, allowing each one to dry before you put
Kategorie
Sport & Outdoors
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, ABS
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen