90 degree triple junction

Triple joint piece at 90 degree angle, to join awning tubes. in my case it is to make a housing or case for my 3D printer.

the measurements are
X, Y, Z = 70mm
internal diameter = 19.2 mm
external diameter = 23.9 mm

I printed it on an Anet A8 Plus at a layer height of 0.4 and it took about 3 hours.

use PLA
nozzle temperature: 200 ° C
bed temperature: 60 ° C
Supports: YES, touching the hotbed
adhesion: brim

you can print only 4 for the top or you can also print 8 if you want to make a cube