Thingiverse
FolgerTech 2020 i3 Z leadscrew upgrade
by wderoxas
231
Downloads
100
Likes
11
Makes
UPDATE:
- Re-uploaded the STL files with units in mm.
- 06Aug2015: Added X ends for 5mm threaded rods
Motor and Idler were from the kit's original STL modified only to fit the leadscrew nut.
Additional modification is to secure the bearings with an m3 bolt as i have noticed that after a while, play on the bearings appear due to the original design's slit.
The belt tensioner was derived from heartless's design: http://www.thingiverse.com/thing:872944 modified slightly to fit this idle
- Re-uploaded the STL files with units in mm.
- 06Aug2015: Added X ends for 5mm threaded rods
Motor and Idler were from the kit's original STL modified only to fit the leadscrew nut.
Additional modification is to secure the bearings with an m3 bolt as i have noticed that after a while, play on the bearings appear due to the original design's slit.
The belt tensioner was derived from heartless's design: http://www.thingiverse.com/thing:872944 modified slightly to fit this idle
Sign in to leave a comment
Sign in