Rostock MAX mounting for Merlin Hot-End 1.75mm

This part will let you mount the Merlin Hot End 1.75mm to the original SeeMeCNC Parts of the Rostock MAX (v2).

You need to cut the threads by yourself.
For this you need the stuff from the picture:
- An 10mm inner thread cutter
- An 10mm outer thread cutter
- An 5mm inner thread cutter
- An 10mm nut

Print this part with a 100% filling level. I recommending ABS or something similar.
Use this part with active cooling fan from the original Hotend course it can go really hot there.