Thingiverse
EMAX 250 Nighthawk - Fatshark 600TVL plate - adjustable angle
by Telnoi
52
Downloads
27
Likes
0
Makes
printed holes are 2mm.
Drill out for 3mm and tab the hole using a metal screw.
Afterwards, use a nylon M3 screw to save weight and cut off or sand down the heads on both sides.
Drill out for 3mm and tab the hole using a metal screw.
Afterwards, use a nylon M3 screw to save weight and cut off or sand down the heads on both sides.
Sign in to leave a comment
Sign in