Zallus reflow oven controller v2 bezel

This is a bezel I designed to compliment the original enclosure on the Zallus website and the stand by Beaker. There is also a picture of the hardware I used which was purchased at Home Depot. I would suggest going with a slightly longer screw if possible.

Original Zallus enclosure:
http://www.zallus.com/resources/

Stand by Beaker:
http://www.thingiverse.com/thing:611186

(8) #4 x 5/8" or 3/4" pan head Phillips screws

(8) M3 flat washers