Customizable ZMR 250 Fatshark 600 TVL Camera Mount

This is a fatshark camera mount for a ZMR 250 with customizable camera angle.
I needed more camera angle than the usual 10-20 degree which can be found. So this is 30 degree but can be reduced to approx. 10 degree or increased to 35 degree. Does not need any glue to be mounted, its just held in place by the top plate and the plate below. The camera is held with a small zip tie and the bottom plate.

The design was inspired by http://www.thingiverse.com/thing:761775 and http://www.thingivers