Thingiverse

9mm Snap-Off Knife (thin version)

von X1Coder

14 Downloads

13 Likes

1 Makes

This is Thin version (minimal version) for 9mm Snap-Off blades without support bolts (Please, see an other versions). You need ~10mm length M3 bolt and two nuts)). I cut off from the big one.

The author is not responsible for failed copies or damage. Everything must be done very strong as you can. ~ 95-100% infill. Please, be careful and not rush.

Supports: NO
Two body parts connected with a specific glue (I used dichlorethane).

9mm blade cuchillo cutter cuttermes diy knife segmented segmented blade Stanley tool tools workshop

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

keine Supports · aufwändige Nachbearbeitung

Ohne Supports Einteilig Hardware nötig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Kleben, Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

9mm Snap-Off Knife (thin version)

Zur Sammlung hinzufügen