Thingiverse
9mm Stacking Ammo Tray - Fixed
par Sublimeice
3
Téléchargements
6
Likes
0
Makes
Fixed the hole size and depth. Also fixed that front section where the was a gap. Should be good to go now.
Hole depth is 9.487mm and the hole diameter is 10.704mm
Print Settings
Material: PLA or PLA+
Layer Height: 0.28 to 0.20
Infill: 5% to 10%
Supports: No
Brim: Outer Brim (to prevent warping)
Hole depth is 9.487mm and the hole diameter is 10.704mm
Print Settings
Material: PLA or PLA+
Layer Height: 0.28 to 0.20
Infill: 5% to 10%
Supports: No
Brim: Outer Brim (to prevent warping)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
