A-10 HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x151.83mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue PLA BambuLab Basic Red PLA BambuLab Basic Gray PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Gray At layer #17 (1.44mm) swap to Black At layer #18 (1.52mm) swap to Jade White for the rest.