A Fast and Simple Bed Leveling Tool

This simple lever can be used to precisely level the bed of a 2-head printer. While designed specifically for the X3Machines' Lorei, it should work with any printer. The needle movement exaggerates the the Z-axis distance under the print nozzle by a factor of more that 20X. With practice, you can level the bed in less that 5 minutes with high accuracy.

Steps for leveling the Lorei:
1. Make sure the printer is off and cool.
1. Back all leveling screws fully out so that the bed sits firmly on all 4 rests
2. Find the highest corner with respect to X-axis arm:
a: Move the printer head as close to the front-left screw as possible (by moving the bed and/or printer heads)
b. Lower the head onto the short-side of the lever until the left nozzle is in the lever's groove and the lever pointer is pointing right at the base.
c. Now without changing the Z-axis height, move the head as close to the 3 remaining leveling screws and observe the lever pointer. The corne