A1 / A1 mini Hotend Multicolor Cable Guide

What I have changed_-Mirrored the extruder guide, so the cable gap is backwards, and the cable is not visible.-Custom painted both parts with an industrial style.-Give it inclination and supports for easy printing, like this the color changes will be greatly reduced. Printing instructions:-0.2 layer height is ok.-Use 2 or3 walls and around 15% infill.-Use supports at 46º (it might be possible to use less supports, but I just wanted to be 200% sure the print is a success).-Brim use is recommended.-You can disable Prime Tower to reduce filament usage.-I suggest you print both parts separately so less color changes happen. Like this, faster prints and less filament. Filament used:-Esun PLA+ Black (215ºC)-PolyTerra Savannah Yellow (215ºC) Description:I wanted the extruder cable to be stronger as it comes out from the extruder itself and goes inside the side shell. So I looked for something like a tube, and I found several designs. I liked the one by @halil_d because it has a curve as it go